Tianjin Botai Heat Exchange Equipment Co.,Ltd
Plate Heat Exchanger Company: Introduction to the Structure Principle and Operating Matters of Soda Plate Heat Exchangers
2021-04-07
Plate heat exchanger company: The steam-water plate heat exchanger has advantages such as compact structure, reliable operation, and simple and intuitive operation, making it an energy-saving product with low consumption. The steam-water plate heat exchange unit continuously converts primary heat into the daily hot water and heating water required by users. That is, steam enters the plate heat exchanger from the primary side inlet of the unit for heat exchange and then flows out from the primary side outlet.
Plate heat exchanger company:Steam-water plate heat exchangerWith advantages such as compact structure, reliable operation, and simple and intuitive operation, it is a low-consumption energy-saving product. The steam-water plate heat exchange unit actively converts primary heat into the daily hot water and heating water required by users. That is, steam enters the plate heat exchanger from the primary side inlet of the unit for heat exchange and flows out from the primary side outlet.
The return water on the secondary side passes through a filter to remove dirt, then enters the plate heat exchanger for heat exchange through the secondary side circulation pump, producing hot water at different temperatures for heating, air conditioning, floor heating, or domestic use to meet user needs. The secondary water is filtered and cleaned, and after being heated by steam, it is supplied for heating.
Plate heat exchanger company: After steam enters the steam-water plate heat exchanger, it becomes condensate or high-temperature return water back to the heat source, circulating in the primary and secondary heating system. The makeup water pump injects soft water into the system to maintain stable system pressure.
When operating the steam-water plate heat exchanger, operators should pay attention to the following matters:
1. After the equipment is running, the temperature of the pipeline surface is relatively high. When operating, safety gear should be worn as required to prevent injury;
2. When the heat exchanger is being drained, operators should stand upwind to avoid high-temperature injuries;
3. Install protective covers at the rotating parts of the equipment's pump to provide protection, and operators should stay away from the pump to prevent unnecessary mechanical accidents;
Plate heat exchanger companySpecific operating methods for the steam-water plate heat exchanger
1. First, turn on the makeup water pump of the steam-water heat exchanger to inject water into the pipeline. When the water pressure rises to 0.2MPa, start the circulation pump.
2. Open the steam valve of the heat exchanger to start heat exchange and observe the changes in outlet temperature and return temperature.
Previous Page:
Address: Baofu No.2, Tianbao Economic Development Zone, Baodi District, Tianjin
Telephone:+86 022-29277918 +86 15510836301
Fax: 022-29277920
E-mail:tjbthrsb88@163.com